Addiction Essay Example | Topics and Well Written Essays - 2000 words

Addiction - Essay Example (Pharmaenergy, 2008) Sleeplessness, lack of appetite, tremors, convulsions, hallucination, continuous sweating, and/or death caused by liver cirrhosis or heart diseases. (Drug Abuse Help, 2008; Addiction Research Foundation, 2003) Sleep disturbances, emotional and physical irritation, the sudden loss of appetite, nervousness, excessive sweating, anxiety, including some occasion of upset stomach, tremors, and chills (Drug Info, 2008) Increased level of anxiety, headache, extreme anxiety, tension, sleepiness, weak and poor muscle coordination, confusion, irritability, becoming dizzy, and having an impaired judgement among others (Novus - Medical Detox Centers, 2007). Immediate withdrawal from the use of Dormicum leads to unexplainable seizures in case the patient has a history of epilepsy. (Pills for All, 2008) Q.2 Michael gives a history of continual use during the past year of Subutex, Dormicum, Cannabis, and alcohol. He insists that he can â€Å"get off them all† by himself. You need to explain to him the special danger of withdrawal from one of the four drugs he is abusing. Identify the drug and give reasons why withdrawal from this drug can be dangerous? Subutex ® is a buprenorphine hydrochloride product that is commonly used in treating heroin which is also known as opioid or opiate drug addiction. (Center for Drug Evaluation and Research, 2008; Patient UK, 2008) The over use of Subutex will not cause serious organ damage but it can increase the patient’s risk to develop liver-related diseases (CSAT Buprenorphine Information Center, 2008). The problem with Michael’s case is that he is abusing the intake of Subutex with the use of heroin, alcohol intake and other drugs. As a precautionary measure, Michael should be informed that the overdose of using Subutex can be fatal especially when used with a tranquilizer

French Favorites For Woodwind Trio Essay Example | Topics and Well Written Essays - 500 words - 1

French Favorites For Woodwind Trio - Essay Example The concert was attended by large crowd of classical music lovers and the fans of the ‘French Favorites for Woodwind Trio (Keith par 1).’ Upon entering the hall, I was mesmerized by its attractiveness. First, the hall is well designed such that the stage can be viewed from any place in the hall. Then, the decorations of the hall, that consisted of flashing disco lights and spelt classical music. Since I was late, I had to wedge my way through the crowd, which consisted mainly of familiar college mates, although with speckles of excited lecturers here and there. I even obtained a giggle from my music teacher who had settled at the fore spaces. I finally got a spacious position at the back place, where I could jig and dance my worry of life outside the hall off. Well, I hastily obtained a dancing partner, my classmate who also had found a position at the back. The master of ceremony was this kind of gentle men that are comedians by nature. From the point of his ushering in the concert’s audience, to his introduction of the performers, the audience could not help but laugh. He made the concert very lively. At the point where he pronounced the names of the ‘French favorite favorites for Woodwind trio’, they received a deafening applause from the crowd. Then, chattering followed as the faces of the audience registered excitement with anticipation. Soon the theatre was grave silent again, and the beats of ‘Suite Breve en Trio’ started to engulf the stage like a wave coming from very far off the horizons. Although so soft and from an old age origin (1905-1991), this music had the power of sweeping off from my feet, and for a moment, I was floating in the air with ecstasy. Oh my! The power of classical music, I did not even realize it as the guest performers entered the stage. I became conscious of them only after the beats faded and then the sound of the English horn in the

Indirect Realism: A Plausible Theory Of Perception?

Indirect Realism: A Plausible Theory Of Perception? In this essay I am going to be examining some of the main claims made by indirect realism as well as looking at some of the fundamental problems these claims cause for the theory, such as the epistemological problem, the ontological problem, and the fact that the theory inevitably leads to solipsism. Indirect realism first arose in an attempt to resolve some of the problems faced by common sense realism, where it became apparent that the assumption that our senses almost always give us true information about the nature of the external world is implausible. Indirect realism therefore modifies the ideas presented by common sense realism, by suggesting that what we perceive directly and are immediately aware of is not the world or the objects within it, but sense data. Indirect realists are far from denying the existence of the physical world, but simply claim that the physical objects in the world cause our sense data, and that the sense data we experience represents the external world, to an extent. For example, when I see a horse, I do not perceive it directly, as common sense realism would suggest. I have no sensory contact with the horse, and what I am aware of is only a mental representation, sort of like an inner picture, of the horse. My visual experience is not directly of the horse; however indirect realism claims that it is caused by the horse. What I am aware of is the representation of the horse, which my senses produce. As Dancy explains, Indirect Realism argues that in perception people are indirectly aware of the physical worldà ¢Ã¢â€š ¬Ã‚ ¦in virtue of a direct awareness of internal, non physical objects.  [1]  This means that although someones idea of an object may resemble the object itself, a person can only ever be aware of their idea and never the object itself. Indirect realism also seems to provide a response to the objections to common sense realism, raised but the Illusion Argument. In the instance of colour, for example, one jacket can look completely different colours when viewed in different lights. If we were to then examine the fibres of the jacket material in more detail, we would probably find them to be a variety of different colours. The way it is perceived also depends on the viewer, for example, someone who is colour-blind may see the jacket differently to someone with full colour vision. In view of this, it doesnt seem to make sense to say that the jacket is really yellow, or that its yellowness is independent of the perceiver. In an attempt to explain this kind of phenomenon, indirect realism introduces the notion of primary and secondary qualities. Primary properties resemble the real properties of the object. John Locke, describes them as being utterly inseparable from the body  [2]  and necessary for conception of it. Primary qualities exist both in the world and in sense experiences, and can be experienced by more than one sense. They are measured by physics and are qualities which the object actually has, regardless of the conditions in which it is being perceived or whether it is being perceived at all. Primary qualities include shape, size, position solidity, extension, motion and rest, and number. Locke argues that secondary qualities are nothing in the objects themselves but powers to produce various sensations in us,  [3]  and conceptually inessential. These qualities exist only in sense experiences and can only be experienced by one sense, but objects in the physical world have the power to produce these experiences in us. It may seem as though these properties are really in the objects we perceive, for example, that the yellowness is somehow part of the yellow jacket, however the yellowness that we experience is simply the objects power to produce yellow images in a normal viewer, under normal conditions. The ideas we have of secondary qualities dont resemble the actual objects but are simply a product of the kind of sensory system that we have. Secondary properties include colour, temperature, smell, taste and sound. One major objection to indirect realism is that it seems to make the real world unknowable. It only makes sense for us to say that A resembles B, if it is possible for us to be directly aware of both A and B, in order for us to compare the two. This creates a rather fundamental epistemological problem for indirect realism because the theory states that our sense experiences of the primary qualities of objects resemble the actual qualities of objects in the external world, however, it also states that we can never be directly aware of the external world, so we therefore have no way of checking whether our sense experiences do in fact resemble the external world at all. For example, if my sense experience of a ball is round, I have no way to check that this corresponds with the actual shape of the ball in the external world. We are entirely limited to the evidence of our senses, and since these work by means of mental representations, it seems as though we can never gain any direct inf ormation about the actual properties of the ball, or any other object in the external world. Indirect realism has also led to a problem related to what is known as the veil of perception, which refers to things that are seen indirectly, and not as they are in themselves. This is because there is a veil that we cannot penetrate, because the things that are being perceived (in this case, objects in the external world) exist independent of sensation. This creates a rather fundamental ontological problem for indirect realism, because it only seems to make sense to say that A is caused by B if it is possible for us to know what B is, however the veil of perception seems to prevent us from doing this. Since we are unable to directly access any physical objects in the external world, it is possible that our sense experience could be caused by something entirely different, for example, Descartes evil demon, God, a mad scientist, the matrix, or ourselves. We have no way of getting outside of our own perception to find out what is causing our sense experiences, if there is in fact anything causing them at all. This is another serious problem for indirect realism; it can lead to solipsism, which is the belief that nothing exists beyond oneself and ones immediate experiences. It suggests that since we cannot know the external world and other minds directly, they may well not exist at all. Solipsism is argued to be philosophically absurd for two reasons; the first being the phenomenological reason, which claims that if we were the only beings that existed, we would not feel emotions such as shame, embarrassment and guilt, which require the existence of another person or being in order to have any effect. The second reason is that logically, solipsism just doesnt seem to make sense, and therefore any theory that leads to or allows for this view point, the way indirect realism does, is also argued to be absurd. In conclusion, it seems that although indirect realism does manage to overcome many of the problems faced by common sense realism, it also seems to create many more serious problems of its own. Although the theory at first seems quite plausible, the fact that it allows for solipsism makes it pretty much irredeemable. Indirect realism also fails to account for the causal relation between the external world and our sense experiences, and as we have seen through the veil of perception objection, we have no real reason to believe that our sense experience bare any resemblance to the external world at all. I think indirect realism would be much more plausible if it could offer some form of explanation of the interaction between our sense experiences and the external world. Mn0.5Zn0.5Fe2O4 Nano-material: Hydrothermal Synthesis Mn0.5Zn0.5Fe2O4 Nano-material: Hydrothermal Synthesis Title: Hydrothermal synthesis and photocatalytic application of Mn0.5Zn0.5Fe2O4 nano-material for degradation of Reactive Blue H5R dye In the proposed research work Mn0.5Zn0.5Fe2O4 nano material will be synthesized using hydrothermal technique for the degradation of reactive blue H5R dye. The chlorides of manganese, iron and zinc will be used for the synthesis of the Mn0.5Zn0.5Fe2O4 nano material. Then synthesized material will be used in water treatment for the degradation of reactive blue H5R dye through photocatalysis using visible light. The examination of the size of the particles and structural properties of the synthesized material will be carried out by using X-ray diffraction (XRD) technique and the morphology of material will be evaluated by scanning electron microscopy (SEM). Particle or grain size of prepared samples of Mn0.5Zn0.5Fe2O4 nano material will be computed using the Scherer’s formula. The photo-catalytic behavior of Mn0.5Zn0.5Fe2O4 nano material will be investigated by measuring the photo degradation rate of the dye. The stability of the nano-photo catalytic material will also be investi gated by the repeated use of Mn0.5Zn0.5Fe2O4. INTRODUCTION Synthetic dyes and different chemicals used in textile industries play significant role in environmental pollution. Some of these industrial chemicals and synthetic dyes decompose aerobically and anaerobically resulting in the formation of carcinogenic compounds (Neill et al., 1999). In the past few decades, there has been huge attention between scientists in increasing semiconductor photo-catalysts with great prospective for environmental protection applications like water disinfection (Ullah et al., 2012; Shahid et al., 2013). Most of the ferrite materials are known to show exciting photocatalytic capabilities for hydrogen or oxygen generation from water upon irradiation with visible light. Such visible light absorption properties, and their proper band edge positions with respect to redox levels essential for water splitting, are desirable for a water splitting photocatalyst to work under sunlight (Dom et al., 2014). Ferrite materials technology has now extended to a very progressive stage, in which the properties to a large extent are designed and controlled by engineers, to garb the particular function of the device. Because of their outstanding magneto-transport properties the mixed valence ferrites have involved huge scientific attention in the recent years (Ahmed and Bishay 2005). In the beginning works the ferrites were attained by soft chemistry and mechano-synthesis (Millotet al., 2007). Hydrothermal strategy is a promising synthetic method because of the low process temperature and very easy to manage the particle size. The hydrothermal procedure has several benefits over other growth methods such as the use of simple devices, catalyst-free growth, low cost, large area uniform production, environmental friendliness and less harmful (Aneesh et al., 2007). Moreover, no post-heat behavior is needed for the created nanoparticles, which makes this method extremely suitable as heat treatment might result in particle collection. (Haw et al., 2002) OBJECTIVE The objective of present research work is to produce Mn0.5Zn0.5Fe2O4 nano-sized particles by hydrothermal technique specifically for catalysis of reactive blue H5R dye. The structural properties of synthesized nano-photocatalyst will be studied by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Photo-catalytic behavior of the Mn0.5Zn0.5Fe2O4 nanoparticles will be investigated by determining the photo degradation rate of the reactive blue H5R dye under visible light irradiation. Review of Literature Rath et al. (1999) synthesized Mn0.65Zn0.35Fe2O4 particles in nanosize (9–12nm) using metal chlorides via hydrothermal precipitation. The characterization was done with TEM, XRD, and VSM. The concentration of chloride ion and pH of precipitate played a vital role in retaining the preliminary stoichiometry of the solution of the nano-material. Whereas at low pH, incomplete precipitation of Mn was observed. Zn loss in the nano-particles at higher pH of precipitation was noted. Bujoreanu et al. (2000) investigated the structure of manganese ferrite in powder form which was prepared by co-precipitation method using MnO2 and FeSO4.7H2O. The powder material then was co-precipitated and aged at temperatures ranging from 55 to 59 oC, then washed and dried in the air at room temperature. By the addition 15% sodium hydroxide solution in the 2N cation solution the stoichiometric amounts of MnO2, FeSO4.7H2O and H2SO4 were precipitated Kosak et al. (2004) prepared nanocrystalline MnZn-ferrite with different morphology through single water-in-oil micro-emulsion comprising of n-hexanol, surfactant CTAB and an mixed metal sulfates solution. The mixture was precipitate with sodium hydroxide solution and oxidized with hydrogen peroxide. The prepared nano materials were characterized by using X-ray diffraction (XRD), BET surface analyzer, magnetometry and transmission electron microscope (TEM). Abdollahi et al. (2004) synthesized various compositions of manganese Mn doped ZnO. using precipitation method. XRD, TEM, SEM, EDX, BET techniques were used for characterization. The band gap measurement was done with UV-visible reflectance. XRD pattern showed no impurity peaks, indicating Mn-related secondary phases. The EDX showed the slightly lower amount of Mn doped on ZnO than the theoretical value and SEM showed that 1% Mn-doped ZnO well ordered morphology, homogeneous distribution of slightly lower particle size and low aggregation. Vaidyanathan et al. (2004) compared Mn0.9Zn0.1Fe2O4 synhesized through double sintering method and chemical co precipitation method in order to find the magnetic properties. The precipitated ferrites showed altered magnetic properties like magnetization (Ms), coercive field (Hc) and Curie temperature (Tc). The particles were reduced in size as compared to co-precipitated nano-sized particles. Arulmurugan et al. (2006) prepared by Mn1−xZnxFe2O4 used for ferro-fluid preparation.TG-DTA, XRD, TEM, VSM and Mossbauer spectroscopy was used for description. The ultimate approximated cation contents decided with the initial degree of substitution. The particle size and curie temperature (Tc) reduced with the rise in zinc substitution. The particles with greater zinc concentration, showed ferrimagnetic and super paramagnetic behavior at room temperature. Yimin et al. (2007) synthesized Mn1-xZnxFe2O4 using metal sulfate in aqueous ammonia. The TEM, XRPD, VSM and TGA were appled to demonstrate the material properties. The classification of the nanoparticles was evaluated and discussed. The effects of the reacting components and preparation methods on the Curie temperature, the magnetization and the size distribution of Mn Zn ferrite nanoparticles. Hejase et al. (2012) produced hyperthermia inducing agents manganese zinc iron magnetic nanoparticles. The structure was recongnized using scanning electron microscopy, X-ray diffraction, and a superconducting quantum interference device. The curie temperature, saturation magnetization, remnant magnetization, coercive field, and hysteresis were analyzed which showed that adapting the Mn contributed to the modification of properties of the magnetic complex. Shahid et al. (2013) synthesized high effective ZrFe2O5 nanoparticles using co-precipitation method. By (EDX) the chemical composition of nano-materials were analyzed. (FE-SEM) was used to study the morphology. The structural properties of the produced material were appraised by XRD technique. By evaluating the degradation rate of TBO dye in aqueous solution the photo-catalytic action of ZrFe2O5nano-particles was examined under visible light irradiation in the presence of ZrFe2O5nano-particles. By increasing time of exposure under visible light irradiation a steady decrease in absorption peak was noticed. As after 140 min of contact to visible light the 92% degradation effectiveness was detected. Besides, ZrFe2O5nano-photocatalyst could be recaptured and reprocessed purely. The rate of TOC elimination and TBO was decreased by only 10% and 5% respectively, afterward seven cycles of use, representing the more photo-stability of the synthesized nano-photo-catalyst material.

Cloning, Triumph or Tragedy? Essay -- Argumentative Persuasive Clone G

Cloning, Triumph or Tragedy? The creation of life through scientific experiments is not a new concept. The idea has been in existence as far back as two hundred years. Mary Shelley was far ahead of her time when she brought the human like creature to life in her writing of "Frankenstein, The Modern Prometheus." The story of "Frankenstein" was written as a myth, yet it continues to leave the world intrigued today. The idea of creating human or animal life is now in the making, except there is a twist to creating this new life. It is known as cloning, bringing an exact replica of cells to life to create an animal or a human that is already in existence. Though human life has not yet been a part of cloning, the cloning of one lamb has recently occurred. The advantages to cloning as well as many ethical dilemmas will be discussed, According to one document, "The technology to clone is simple, though far from perfect." Various views will also be shared from J. Michael Bishop ¹s"Enemies of Promise." Scientists will express their beliefs in the advancement of technology and the use of science in today ¹s world. Many definitions of cloning have been brought to light by groups and organizations. The American Medical Association defines it as "the production of genetically identical organisms via somatic cell nuclear transfer." Cloning is the method of producing a baby gene that has the same gene as its parent. The idea of cloning all began in 1997 with embryologist, Ian Wilmut, from Roslin Institute in Scotland. He and his colleagues were the first to clone a lamb they named "Dolly." Before this experiment was proven successful, cloning was thought to be an impossible endeavor. It is true that the technology to clone does exist, but ... ... it is human failure that causes problems in our society. People need to think harder about the reality and the effects cloning could have on society before cloning itself becomes real. If human cloning ever does become legalized and takes place, I surely hope that science doesn ¹t take the bad  ³rap ² for it, but the failure of humans instead. We saw Victor Frankenstein ¹s failures, we saw other accounts of failures. Maybe we should learn from the various examples, that human life is extremely fragile and to distort it could change the human race forever. Works Cited Bishop, J. Michael.  ³Enemies of Promise. ² 237-242 Farnsworth, Joseph (2000, April) To Clone or not to Clone. http://farnsworth.tripod.com/Humancloning/cloning_m.htm Marty, Martin (1997, May) A Wolf in Sheep ¹s Cloning. http://thelutheran.org/9705/page26.html Shelley, Mary.  ³Frankenstein. ² 231-235

Trim Store Sop

SOP for Trims & Stationary Store Trims & Stationary Store Objectives: * Storage of all the various trims and stationeries that comes with detailed data. * Ensure no short supply of various trims before bulk production. Activities: * Pre-Trims & Stationeries Receive Activities: The monthly planner for trims in-house should come to the store in-charge with the weekly updates and changes should be communicated at the very instant of the occurrence. The trims purchase team should make sure to in-house the planned trims at least before 20 days to carry out pilot run and for bulk maximum 5 days.After receiving the requirement list from the purchase team it is the duty of the trim store in charge to follow up the status of the ordered trims. If in case trim is late from the planned date of receiving then the same should be intimated to the planning, cutting, and merchandiser so that the necessary steps can be taken to acquire the trim before production starts. NOTE: The stock of stationerie s should be checked time to time so as to avoid any situation of shortage. * Trims/Stationary Receive: Unloading the trims: Unloading should be done in the presence of the store in charge/supervisor.The supplier invoice or the transporters copy of the Delivery Challan should be checked by the trims store in charge and then unloading should be done in the designated area. The received trims quantity should be cross checked against the supplier packing list while unloading and should be verified by the store incharge. If quantity is less, the transporters are informed and it is recorded on Delivery Challan. The Invoice copy should be filed in â€Å"Daily trims/stationary receive file† and at the end of the day material inward details should be updated by the store incharge.The information of trims received against the Purchase No. is informed to the purchase person and the concerned merchandiser. A swatch card of a trim of every kind received for a particular order should be se nt to the merchandiser handling that buyer for approval. Once approved it should be prominently displayed on the trim store board. * Trims Inspection * The trims should be kept on the inspection table before checking. * The trims should be inspected to cross check the purchased quantity to the actual quantity received. 100% inspection should be done for each trims received. * Make full use of the Count & Weight M/c to know the actual number of particular trims received. * In case of zippers the length of each should be measured and those not conforming should be separated and exchanged. * Keeping the trims in racks after Inspection: * Depending on the order quantity a rack box (upto 3500 garments), 2 rack boxes (3500-8000 garments) or a column(more than 8000 garments) in a rack is allotted for a particular style. A board should be attached to it clearly stating the style number. A stock card should also be affixed along with it duly filled with the required quantity for each trim in that order. * When the inspection for a trim for a particular order is completed and the received trim is â€Å"OK†, it should be kept in the rack allotted for that particular order. * All the trims being loaded on to the rack after inspection should be entered into the stock card carefully mentioning the order quantity received and date of receival. * If any trim is already available in stock the required quantity for that order is counted and kept on the rack dedicated for that order.On the swatch card it should be mentioned that the trim was â€Å"IN STOCK†. * All trims movement should be done carefully. * Issue trims to various departments * Trims should be issued only against the requisition slip. * Exact number of trims should be issued. No extra trims should be issued. * As soon as the copy of cut parts issued is received from the cutting room the required amount of trims for stitching that quantity of garments should be fetched from the respective racks. They should all be ready in one carton so that as soon as the line feeder comes with a requisition from bundling the trims are issued. The trims required for packing can be issued only three times a day in the allocated time slot. * As soon as some trim is taken off the rack for issuing, the issued quantity along with quantity left on the rack should be updated in the stock card. * Returned trims * The returned trims should be kept in the returned trims storage area only. * Records should be maintained about the returned trims along with the departments from where those are coming. * If those trims are style specific they should be disposed off 2 months after the shipment is sent with a consent from the merchandising department. Keeping of stationary * As soon as the stationary received it is cross checked with the order quantity. * It is then kept on the stationary rack segregated according to the type. * The same is recorded on the stock card mentioning the received quantity and date. * Issuing of Stationary Stationery should be issued only against a requisition slip. As soon as any kind of stationary is issued the stock card should be updated noting down the issued quantity and quantity left. As soon as the quantity left reaches the danger zone an order should be placed for it.

Amish Tripathi

The three books collectively comprise the Shiva Trilogy. THE IMMORTALS OF MEHULA was a surprise bestseller, breaking into the top seller charts within a week of its launch. The Shiva Trilogy has become the fastest selling book series in the history of Indian publishing, with 1. 7 million copies in print and over Rs 40 crores in sales. Forbes, India has ranked him 85 in the 2012 Celebrity 100 list. Before being an author is journey was very different. Amish tripathi had completed is MBA from IIM-Calcutta. He worked for 14 years in the financial services industry, in companies such as Standard Chartered, DBS Bank and IDBI Federal Life Insurance, before starting his writing career. He never wanted to be a writer which is very hard to believe. The Banker turned author of popular Shiva trilogy recently won a millon dollar for her books. The Immortals of Meluha and The Secret of the Nagas, the first two novels by Tripathi, have been commercial successes. Amish's books have sold a million copies in the span of two years with a gross retail sale of Rs 22 crores. The third installment, titled The Oath of the Vayuputras, was released on 27 February 2013. With The Oath of Vayuputras selling more than 400,000 copies even before its release, the trilogy has become a success. The Shiva Trilogy has become the fastest selling book series in the history of Indian publishing, with 1. 7 million copies in print and over Rs 40 crores in sales. In the Indian market where large sales volumes of books are rare, Tripathi's books have been enormously successful. Tripathi's marketing skills and strategies have been widely credited for the success of his novels. Tripathi himself says: â€Å"It’s a fallacy to think that a good book sells itself. I can give you a long list of books that I think should have been bestsellers but nobody’s heard of them. My management background along with marketing experience helped me devise effective strategies for promoting my book. Weeks before The Immortals of Meluha hit the bookshops, Tripathi printed sample copies of the first chapter and persuaded bookshops and chains to give them away free to anyone who approached the cash counter, creating a buzz. It was an unprecedented move and gave the book very high visibility considering that at that time, Tripathi was an unknown author. He also made presentations to big retail chains, visited smaller retailers, met local distributors and regularly sent email updates to various stakeholders. Tripathi targeted social media websites for promoting his debut novel, and made a trailer film with a background score reportedly by Taufiq Qureshi and uploaded it on YouTube. For promotion of his second book, Tripathi created video trailers and screened them at multiplexes. These trailers were of similar quality as movie trailers, complete with visual effects. They were released with the Shahrukh Khan starrer Ra. One. Tripathi believed that this would â€Å"work as the audience that visits theatres is the same that reads my books. Three other trailers were released on YouTube. In 2013, a music album called Vayuputras, an original soundtrack based on The Oath of the Vayuputras, the final book of the Shiva Trilogy, was released. The album had songs by artists like Sonu Nigam, Taufiq Qureshi, Palash Sen, Bickram Ghosh amongst others working on this. This was the first time ever that an original soundtrack has been made for a book series. It was not just his writing skills but the marketing skills & techniques which made him a successful person.